Work table KvSt13ts

Size 1580x675x750mm. MK made of profile pipe 50x25x1.5mm, crossbeam pipe 40x25x1.5, hot-rolled sheet 3mm thick. The frame consists of all-welded supports with special brackets for fixing the crossbeams that connect the frame supports.

The frame is made using laser cutting technology. The effect of the table top floating is created due to the difference in the level of the supports relative to the crossbeams. The support is made of 50x25x1.5 pipe.

It has an O-shaped welded construction. There are two 9.5 mm holes in the support for installation of threaded rivets m6 for fastening of the kingpin. Two brackets made of 3.0mm thick hot-rolled sheet metal are welded to the top of the support.

The brackets have two 9.5 mm diameter holes for installation of threaded rivets required for fixing the crossbeams. At the bottom of the support in the tube are installed threaded plugs with adjustable plastic supports with a diameter of 32mm, with the possibility of adjusting the table top LDFP 22mm, 16mm. PVC edging on the circle 2mm.

Fastened to the frame with self-tapping screws 3.5x20.