Low Laboratory Table with Superstructure 4 for Reliable Research Applications

The stand (sidewall) has a C-shape, the upper horizontal part is made of 30x30x1.5mm pipe. The lower horizontal part is made of 60x30x1,5mm pipe.The vertical part consists of two 30x30x1,5mm pipes and a box. The box is bent from cold-rolled sheet metal 0.7mm thick with overall dimensions of 615x145mm with a border around the perimeter of 15mm.The rack (sidewall) is a welded kingpin 1436x540mm.

Tsarga is made of profile pipe cross-section 30x30x1,5mm.On the front side of the right (or left) side made two holes with a diameter of 45mm, under the splash-proof electrical outlets 220v degree of protection IP54. Metal cover 146x45mm.Made of cold-rolled sheet metal 1mm thick Table top and shelves Table top: 1500x600, LDFP 22mm. PVC edging around the perimeter 2mm.

Covered with plastic at the bottom and top. Holes are made for attaching the rack and for the electronics wiring. Shelves: 1415x260 2pcs, 16mm chipboard.

PVC edging 1mm around the perimeter.